Why Your Swim Spa Cover Stinks!

Hey, no offense, but your Swim Spa Cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at some time or another; water is among nature’s most erosive compounds. Moisture seeps in and becomes trapped in between the outer vinyl shell and the cling wrap foam cores. The warm, damp environment is ideal for mold and mildew and other forms of foul-smelling things.
If moisture has actually permeated even more into the cling wrap foam core, the cover ends up being waterlogged, which can rapidly grow all sorts of dark and stinky slime, but also make the cover really hard to remove, and not as efficient at keeping the heat in the spa. Time for a better type of Swim Spa Cover

Foul-smelling Swim Spa Cover?!?
• Broken or harmed. Broken foam cores, ripped or worn areas, torn seams. A Swim Spa Cover that loses it’s arched roofing line, to keep water draining pipes off properly, will ultimately begin to puddle water, which is most likely time to buy a new Swim Spa Cover! A Swim Spa Cover with threadbare areas in the vinyl is likewise problem, and although you can ward off the inescapable with a duct tape repair work, the water will win, eventually.
• Not Removed Regularly. Remove your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can withstand longer periods, but it’s an excellent practice to eliminate the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow moisture to get away do so, but don’t eliminate delicate foam panels unless absolutely necessary.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, however it will not stop moisture very well. Even the very best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat bonded seam are not going to keep the intense moisture from your spa from reaching the foam core. The only genuine option is a Swim Spa Cover utilizes air to insulate instead of foam.
• Bad Spa Water. If the spa water is not preserved regularly with sanitizer and filtering, or is not stunned often enough, germs and algae can take advantage of a hospitable environment to flourish. Low pH, high chlorine or high ozone levels can also weaken the underside of your Swim Spa Cover cover. Due to the fact that the cover is so near to the spa, it takes in the chemistry of the spa. Clean, clear and sanitary water is the best environment to prevent foul-smelling spa covers. (Sorry however this is just BS) The truth is the areas in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roof, that can be even worse than no roof at all, if an overhanging eave drains water onto the Swim Spa Cover Tidy and condition a spa cover 2-4 times annually, so that it always looks fantastic, and is protected from the components. Again, this truly isn’t going to stop the mold and mildew from growing inside a foam cover But it will assist your spa dealer pay their expenses. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Repair Your Swim Spa Cover!
• Remove to Safe Location: This first step might seem apparent, however you require an excellent location to permit the cover to sit undisturbed from pets, wild animals, and winds. It needs to be a warm location if possible, or a dry indoor location with low humidity can likewise be used.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as mild as possible. Don’t use household cleaning products on your Swim Spa Cover, weird chemicals can wind up in your spa water. Gently tidy all outside surfaces with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this need to be prevented if possible, due to the fact that the panels could end up being damaged during removal or cleaning. But if you determine that there is something slimy inside, you can typically unzip and eliminate the panel for a cleaning inside and out.

How typically does your spa dealership expect you to do all this? If your swim spa is secured from many sun and rain, twice annually. If it’s exposed it needs to be 3-4 times each year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Better Choice
The easiest remedy for a stinky Swim Spa Cover is to simply buy a various sort of Swim Spa Cover A stinky swim spa cover simply implies that your cover is handling wetness, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam but has actually sealed air chambers instead will prevent giving the mold and mildew a location to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *